For years now, the world has been talking about “Industry 4.0”. The exchange of data in production plays an important role in making the introduction of Industry 4.0 a success. The open communication protocol OPC Unified Architecture, or OPC UA, is increasingly gaining popularity as a way of promoting data sharing. But what advantages and benefits does using OPC UA offer the plastics industry, for example?
In the plastics industry, the OPC UA machine communication standard helps to optimise processes from production to service while minimising the loss of time, resources and products (rejects), thereby ensuring top quality and maximum value creation.
A plastics company that produces caps and lids for the cosmetics industry, for example, may have multiple injection moulding machines in use on the shop floor. To increase plant availability, the company might use metal separators that are located directly between the mixing and dosing unit for the granulate and the material feed of the machine.
Under certain circumstances, the granulate
could contain a small, metallic contaminant that makes its way through the
mixing and dosing unit and into the machine by way of the conveyor pipe. The
metal separator would detect the tiny metal part and expel it safely,
preventing any disruptions to the production process. Because a small amount of
the desired material is also expelled during separation, the volume of granulate
actually reaching the injection moulding machine may fall short of the expected
The OPC UA link allows the metal separator to notify the mixing and dosing unit that a certain amount of material has been expelled. At the same time, it provides information as to the volume that needs to be added back into the system to maintain correct calculation. The result is a smooth manufacturing process that produces perfect caps and lids.
Without standardised communication thanks to OPC UA, even the slightest deviations in the quality and flow of granulate could lead to the production of faulty parts, such as weak, under-injected lids. Such defective products often remain unnoticed at first and are later packaged for shipment to the customer without further inspection, virtually ensuring complaints.
By intelligently connecting all of the components involved in production and processing, OPC UA ensures smooth communication in the plastics industry. The exchange of data between metal separators and dosing units, for example, is the key to increasing plant availability and product quality while preventing complaints.Bartosch Jauernik, an OPC UA expert at Sesotec, says: “We are confronting the challenges of Industry 4.0 head-on and are actively working on the development of OPC UA standards for our devices. Sesotec is one of the first providers of intelligent metal separators for the plastics industry. Our devices can communicate with each other and with other machines, exchange data and optimise themselves.”
The selection of your country allows us to offer the optimal content for you.
We have detected the following country based on your IP address:
If this is not correct, please choose your country below.
Albania Andorra Armenia Austria Aserbaidschan Belarus Belgium Bosnia-Herzegovina Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Georgia Germany Greece Vatican City Hungary Iceland Ireland Italy Kazakhstan Kyrgyzstan Lattvia Liechtenstein Lithuania Luxembourg Macedonia Malta Moldavia Monaco Montenegro Netherlands Norway Poland Portugal Romania Russia San Marino Serbia Slovakia Slovenia Spain Sweden Switzerland Tajikistan Turkey Turkmenistan Ukraina United Kingdom Uzbekistan
Anguilla Antigua & Barbuda Aruba Bahamas Barbados Belize Canada Cayman Islands Costa Rica Cuba Dominica Dominican Republic El Salvador Greenland Grenada Guadeloupe Guatemala Haiti Honduras Jamaica Martinique Mexico Nicaragua Panamá Puerto Rico Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Trinidad and Tobago Turks and Caicos Islands USA United States Virgin Islands British Virgin Islands Netherlands Antilles
Afghanistan Bahrain Bangladesh Bhutan Cambodia China Taiwan India Indonesia Iran Iraq Israel Japan Jordan North Korea South Korea Kuwait Laos Lebanon Malaysia Mongolia Myanmar Nepal Oman Pakistan The Philippines Qatar Saudi Arabia Singapore Sri Lanka Syria Thailand United Arab Emirates Vietnam Yemen
Algeria Angola Benin Botswana Burkina Faso Burundi Cameroon Cape Verde Central African Republic Chad Comoros Republic of the Congo Democratic Republic of the Congo Ivory Coast Djibouti Egypt Equatorial Guinea Eritrea Ethiopia Gabon Gambia Ghana Guinea Guinea-Bissau Kenya Lesotho Liberia Libya Madagascar Malawi Mali Morocco Mauritania Mauritius Mozambique Namibia Niger Nigeria Rwanda Sao Tome and Principe Senegal Seychelles Sierra Leone Somalia South Africa Sudan Swaziland Tanzania Togo Tunesia Uganda Zambia Zimbabwe