Circular-aperture metal detectors are installed in tube conveyors, where they serve to reliably detect magnetic and non-magnetic metals in raw fiber material. By eliminating metal particles, the metal detectors protect equipment from damage, reduce production downtime and prevent sparking.

For the separation of ferrous contaminants, plate magnets are installed in a continuous material flow above conveyor lines, in free fall, under chutes and slides, etc.

Show more

PRM
An inline chute magnet system for use with fibrous materials and materials that tend to bridge, which has proven effective with very high throughput rates and tubular pressure conveyor systems. Hinged stainless steel plates swing out for easy cleaning of the magnet blocks.
Show more

The PROTEX R is an inline tunnel metal detector that is installed in vacuum or pressure conveyor lines to inspect raw wool or textile fibers for magnetic or non-magnetic metals. If metal is detected, a signal can be sent to the process controller or a shunt can be automatically activated to divert material to the reject unit.
Show more

WM

Permanent magnetic head rollers are designed to replace the drive roller at the discharge end of belt conveyors. This primary system removes coarse and medium-sized ferrous contaminants.

Show more

S+S is a member of
VDMA
Choose the original
As a member of the VDMA (German Engineering Federation) we support the  "Choose the original" initiative for the protection of original technology against product and brand piracy!

Choose the original