S+S metal separators and magnet systems protect extruders from damage that can be caused by metal particles in the plastic granulate, even when enclosed in the product. Equipment stoppages and production downtime caused by plugging of melt filters and nozzles are reduced.

1 2 >
A magnetic separator for high material throughputs, and larger column diameters (40 - 120 mm) and particle sizes (8 - 10 mm), the EXTRACTOR-SE is installed at the feedstock intake of the extruder and is used to remove ferrous materials prior to processing.
Show more

GF
These metal separators are designed to be installed in horizontal, vertical or inclined vacuum and pressure pipes. Detection and removal of contaminants is effective even at high speeds and rejected material is removed into a container with no interruption to material flow.
Show more

GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
Show more

GMT
An economical permanent magnet system installed at the feedstock intake of the extruder, the GMT eliminates larger particles of ferrous metals to produce a higher quality product and reduce expensive repairs.
Show more

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.

Show more

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
Show more

Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.
Show more

Metal separator for freefall applications that is installed at the discharge of the cyclone or bag filling tube, for applications requiring higher scanning sensitivity.
Show more

Metal separator used to inspect slowly moving bulk material such as foil flakes as well as large streams.
Show more

The RAPID PRO-SENSE metal separator primarily is used for quality inspection (product purity) in the production and compounding of plastic granulate, where it typically is installed directly before the material is filled in bigbags, octabins, or silos. The metal separator also is used for quality inspection in the incoming goods department of plastic-processing plants (product purity, machine protection).

 

 

Show more

1 2 >
S+S is a member of
VDMA
Choose the original
As a member of the VDMA (German Engineering Federation) we support the  "Choose the original" initiative for the protection of original technology against product and brand piracy!

Choose the original